- New Inlet Position
- MonoChamber design improves start behavior
- Improved Speed & Glide
- Even better flare power & high-AoA flight





Versatile high performance, for advanced pilots.
AURA SERIES VIDEOS
INFO
While the Corvid series is all about short starts and ease of use, and the CR+ variants are focused on maximum surface area and glide, the AURA series is the ultimate all-rounder.
The new A6 is an incremental evolution of the A5. After over a year of testing inlet type and positioning, we have arrived at a new location and a new slightly lower drag inlet design. This suit is not a revolution vs the A5, but there is a measurable performance improvement as a result of the inlet change. All other design aspects remain the same as the A5.
The AURA series is for pilots who have at least two seasons of WS BASE experience and fly at an advanced level in skydive and BASE. The AURA excels in big mountain lines and delivers class-leading speed, glide, and flare power.
NEW INLET DESIGN & POSITION
After many A6 prototypes we have arrived at a lower profile traditional scoop inlet which has a smaller drag profile. The new lower arm wing position gives the best results at the widest range of AoAs, with the desirable side effect of a less physical feel in the arm wing.
SEAMLESS LEADING EDGE
Our proprietary leading edge Glide Skin now wraps more of the forward wing chord for reduced drag at the most critical point of the airfoil.
CUSTOM INTERNAL PRESSURE
All of our suits allow you to choose the amount of internal pressure in the arm wings. Choose from full pressure for maximum performance, or reduce it for easier maneuvering in acro / freestyle flight.
AIRFOIL CROSS SECTION
Designed for Performance or Freestyle, the removable airfoil cross section adds glide and speed performance and increases agility and range in any suit that it is added to. More information on leading edge foam.
INNIE-OUTIE
Back by popular demand, the Innie-Outie system (introduced by SQRL in 2012) allows you to place your BASE harness inside the suit for reduced drag and increased comfort, or leave it outside the suit for skydive training.
EVOLV TRAX RUBBER BASE SOLE
The new TRAX Super Sticky BASE Sole has been developed in cooperation with Evolv, a leading climbing shoe manufacturer. The tread pattern is designed specifically for exit force traction, and the rubber is sticky in all conditions: wet, dry, warm, and cold. This mold is the only custom wingsuit sole ever created and is the highest performance option available.
MASSIVE LEG WING POCKET
The new leg wing pocket is the full width of the end cell, has zip closure, and is ideal for the stowage of hiking poles, ropes, and other equipment.
AIRTIGHT CONSTRUCTION
All of our suits are built to the most exacting specifications, and tested for airtight symmetry in our production facility at multiple points along the construction process.
MAIN SURFACES
Our main surface fabric is a 210D Rip-stop, with low stretch and an ideal rigidity-to-comfort ratio. Its balance of weight / durability, along with mechanical stability and tear strength, makes it the perfect mid-weight material for wingsuits.
LEADING EDGE MATERIALS
GlideSkin is an aerodynamic and wrinkle-resistant material that features a fine grain that is aligned with the relative wind.
INTERNAL RIBS
All ribs are constructed from lightweight sail cloth, chosen for its ideal stability-to-weight ratio.
ZIPPERS
SQRL wingsuits are constructed with the strongest and highest quality zippers available. Locking YKK 10C zips are used on the main body, harness-interface, and arm sections of every suit we make.