MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
MainSlideImage
FREAK 5
THE ONE AND ONLY...

  • New reduced drag inlets
  • MonoChamber wing design
  • Same agility, increased solidity
  • Seamless Leading Edge
  • Class-crushing speed, glide, & range
  • Gen2 Sym-Blend profile
FEATURES

MONOCHAMBER DESIGN

All sections of all wings are fed by any and all of the eight inlets on the top and bottom surfaces. The suit feels incredibly consistent across the entire span in all maneuvers.

defaultImage

GEN2 SYMBLEND PROFILE

We've improved the profile for better belly performance, more flare, and lower stall speed (think XRW). It remains stable and comfortable at all angles from XRW to Head Down.

defaultImage

CARBON FIBER GAS PEDALS

First used in our race suits, this optional carbon fiber insert increases lengthwise tension in the suit. Easily install the plates for more power and precision.

defaultImage

NEW VALVE INLETS

Our High-AR inlet has gotten an upgrade and functions even better with the Monochamber design -- you'll feel the consistency of the Monochamber, with better air retention in maneuvers and transitions.

defaultImage

INTEGRATED PROFILE GRIPPER

Increases lifting surface without increasing the total surface area of the suit, while placing the pilot's hand in a more natural location.

defaultImage

NEW SEAMLESS LEADING EDGE

Our proprietary leading edge Glide Skin now wraps more of the forward wing chord for reduced drag at a critical area of the wing.

defaultImage

RAD

Clean Pulls: A carefully designed forearm segment of your leading edge allows better access to your PC at pull time, and risers during opening. BOC access and early riser control are safer and more intuitive.

defaultImage

CUSTOM INTERNAL PRESSURE

Airtight zippers! All of our suits allow you to choose the amount of internal pressure in the arm wings. Choose from full pressure for maximum performance, or reduce it for easier maneuvering in acro / freestyle flight.

defaultImage

AIRFOIL CROSS SECTION

Designed for Performance or Freestyle, the removable airfoil cross section adds glide and speed performance and increases agility and range in any suit that it is added to. More information on leading edge foam.

defaultImage

MORE POCKETS

More snack-holes! Every Squirrel wingsuit gets an inside-arm pocket and a nutsack. If you need mega-storage, we got you. Just choose that option on the order page.

defaultImage

QUICK-ZIP ATTACHMENT

The new Quick-Zip system more durable and easier to use, making suit-rigging fast and easy. The adjustable lateral slot accommodates a range of harness types and sizes.

defaultImage

EVOLV TRAX RUBBER BASE SOLE

The new TRAX Super Sticky BASE Sole has been developed in cooperation with Evolv, a leading climbing shoe manufacturer. The tread pattern is designed specifically for exit force traction, and the rubber is sticky in all conditions: wet, dry, warm, and cold.

defaultImage

MAGSNAPS

New magnet snaps require no pressing action to attach and securely lock together until they are intentionally lifted upwards to separate. Sometimes it's the little things...

*Patents Pending
DETAILS

Freestyle agility, with “big suit” performance: The FREAK series is the go-to choice for advanced acro & freestyle flying.

The Freak 4 was a leap forward in performance and handling with the addition of the Monochamber, and the Freak 5 builds on this progress with a more solid overall feel and the same incredible agility. You will notice three areas of improvement:

  • A more consistent feel in the arm wing, with the suit being less sensitive to tension and AoA.
  • Better pressure retention in maneuvers with slightly more power in the arm wing.
  • Improved overall handling

MONOCHAMBER TECH

All parts of the arm and leg wings are fed from every inlet on the suit, for an excellent feeling of balance and consistency through maneuvers.

VERSATILITY

It's the ultimate dropzone suit. No other suit in its class comes close in terms of speed range, flare, and overall handling & performance. Don't take our word for it — get a demo.

AGILITY & PERFORMANCE

The symblend profile has been tuned for better performance on the belly, with the same backflying performance and overall agility.

The Freak series remains the benchmark for all-around performance in the experienced pilot category. The entire SQRL team agrees that this is the one must-have suit for any serious pilot.

NOTE: Our Airfoil Cross Section foam is highly recommended for FREAK series suits.

MATERIALS

MAIN SURFACES

Our main surface fabric is a 210D Rip-stop, with low stretch and an ideal rigidity-to-comfort ratio. Its balance of weight / durability, along with mechanical stability and tear strength, makes it the perfect mid-weight material for wingsuits.

LEADING EDGE MATERIAL

GlideSkin is an aerodynamic and wrinkle-resistant material that features a fine grain that is aligned with the relative wind.

INTERNAL RIBS

The Freak 5 rib material varies across the span. Lightweight sail cloth ribs support the thicker section of the profile, with mesh used in thinner areas where crossports are less ideal.

ZIPPERS

SQRL wingsuits are constructed with the strongest and highest quality zippers available. Locking YKK 10C zips are used on the main body, harness-interface, and arm sections of every suit we make.

HELP/CONTACT